Infusion and storage of liquid nitrogen in liquid nitrogen tank

2020-10-09 15:59:07

Infusion:

　　 If you want to output liquid nitrogen from the liquid nitrogen tank, please follow the procedure below:

　　 Close the vent valve; open the booster valve; observe the pressure gauge; when the pressure rises to 0.05 MPa (0.5 kg/cm2), open the drain valve to allow continuous infusion.

　　Inspection during use

　　 Always check during use. You can observe with your eyes or touch the shell with your hands. If you find frost on the outside, you should stop using it; especially when the inner wall of the neck tube is frosted and frozen, it is not advisable to scrape it with a knife to prevent the inner wall of the neck tube from being damaged and resulting in poor vacuum. Instead, take out the liquid nitrogen and let it melt naturally.

custody

　　 Placement of liquid nitrogen tank

　　 Liquid nitrogen tanks should be stored in a well-ventilated and cool place, and should not be exposed to direct sunlight. Due to its precise manufacturing and inherent characteristics, liquid nitrogen tanks are not allowed to be tilted, placed horizontally, inverted, stacked, collided with each other or collide with other objects, no matter when they are used or stored, they must be handled gently and kept at all times. upright.

Nuoruida (Tianjin) science and Technology Co., Ltd. is committed to research, development, and sales of liquid nitrogen freezer. Using European technology, we provide a variety of equipment. The main equipment is liquid nitrogen cryogenic freezer, liquid nitrogen cabinet freezer, liquid nitrogen tunnel freezer,sub-zero processing equipment, cryogenic freezing equipment, and so on.